Fujitsu DX8100 S2 Manual Do Utilizador
Chapter 4 Configuration Settings
4.2 Configuration Settings for Using Standard Volumes (When Using Host Affinity Settings, Previously Referred to as LUN Mapping)
4.2 Configuration Settings for Using Standard Volumes (When Using Host Affinity Settings, Previously Referred to as LUN Mapping)
ETERNUS Web GUI User’s Guide
Copyright 2013 FUJITSU LIMITED
P2X0-1090-10ENZ0
68
4.2
Configuration Settings for Using Standard Volumes (When
Using Host Affinity Settings, Previously Referred to as LUN
Mapping)
Using Host Affinity Settings, Previously Referred to as LUN
Mapping)
LUNs can be allocated to either CA port groups or CA ports.
4.2.1
When Allocating the CA port Group to the LUN Group
The following section describes the series of settings when creating CA port groups and using Standard
volumes.
Not only can new RAID groups be created, adding or changing volumes that are registered in existing RAID
groups can also be performed.
volumes.
Not only can new RAID groups be created, adding or changing volumes that are registered in existing RAID
groups can also be performed.
Create RAID Group
Create a RAID group (
a group of drives that configures the RAID in the ETERNUS DX Disk
storage system
).
Refer to:
-
Create Volume
Create a volume (drive area in the RAID group). A volume is a structural unit of RAID that can be
recognized from the server. Select "Standard" for "Type".
recognized from the server. Select "Standard" for "Type".
Refer to:
-