Fujitsu DX8100 S2 Manual Do Utilizador

Chapter 4  Configuration Settings
  4.2  Configuration Settings for Using Standard Volumes (When Using Host Affinity Settings, Previously Referred to as LUN Mapping)

ETERNUS Web GUI User’s Guide

Copyright 2013 FUJITSU LIMITED

P2X0-1090-10ENZ0

4.2.2

When Allocating the CA port to the LUN Group

The following section describes the series of settings when using Standard volumes without creating CA port
groups.
Not only can new RAID groups be created, adding or changing volumes that are registered in existing RAID
groups can also be performed.

Create a RAID group (

a group of drives that configures the RAID in the ETERNUS DX Disk 

storage system

).

Refer to:

Create a volume (drive area in the RAID group). A volume is a structural unit of RAID that can be 
recognized from the server. Select "Standard" for "Type".

Refer to:

Create a LUN group (a group of volumes that are recognized from the server, which is 
conventionally referred to as an "affinity group").
Correspond the volume number to the Logical Unit Number (LUN) that can be recognized by the 
host for each LUN group.
LUN groups are recognized from the server by the host affinity setting that allocates the CA 
ports to the LUN groups.

Refer to:

To recognize the LUN group from the server, select "All" for the host  and allocate the CA port  
and the LUN group.

Refer to: