Siemens 75 Manual Do Utilizador

Connecting a PC to the base station

Gigaset 3070/3075isdn, GB, A31008-G3070-B100-3-7619

giga3070KAP.fm

09.01.01

Operating Gigaset talk&surf with Windows 95/NT

Gigaset M101 Data allows for access using Windows 95/NT via the V.24 inter-
face (COM port). If you wish to use this functionality, proceed as follows:

Proceed as follows:

1.

Gigaset 3070/3075isdn and Gigaset M101 Data are installed.

2.

Start the configuration program for Gigaset M101 Data via 

> Start > Programs > Gigaset M100 Data > Gigaset Setup

.

Select the window "Local adapter", a free registration location is selected.
Check that your Gigaset M101 Data has been set to the type 

Portable part

 

(default). (If it has not, please refer to the electronic operating instructions 
on the CD-ROM for information on how to change the station type

 

> CD-ROM-drive:\M101Data\config\german\M10x.pdf)

.

3.

Switch Gigaset 3070/3075isdn to registration mode (press LED).

4.

Click the 

Register

 button and enter the PIN of the partner station (default:

0000).

5.

Click 

OK

. The registration procedure starts and the message "

If the

required base is ready for registration, the local adapter logs on. Check
that the base is ready for registration.

“

The two devices are automatically synchronised. An entry now appears in
the 

Registered adapter

 list.

*

You can find out which is the virtual COM port for Gigaset M105 Data either by starting 
the program 

Gigaset Setup

 and view the COM port in the 

Connection 

tab. (It may take 

a few seconds for this to be displayed correctly) or you could select 

> Start > Settings 

> Control Panel > System,

 then click on the 

Device Manager

 tab and select the ports 

there (COM and LPT). A list of installed ports is displayed. You will recognise the virtual 
COM port for Gigaset M105 Data by its name: 

DECT USB serial Port

 (COM x).