Siemens 75 Manual Do Utilizador

Connecting a PC to the base station

Gigaset 3070/3075isdn, GB, A31008-G3070-B100-3-7619

giga3070KAP.fm

09.01.01

Updating Gigaset M101 Data for operation with Gigaset 3070/3075

Before you begin, make sure Gigaset M101 is already connected to the PC, 
the configuration program is loaded, and the COM port is set correctly. 
The firmware version must be 

http://www.ic.siemens.com/mySiemens/full/

. Start the firmware update in the dialog 

which appears by pressing the [Firmware Update] button. Proceed as follows:

1.

Open the browser, enter the address

 and download the update 

file onto your hard disk.

2.

Start the Explorer and select the directory to which the update file was 
downloaded (m101data_xyyy_.exe), where xyyy stands for the version 
number.

3.

Navigate to m101data_xyyy_.exe under the selected path M101Data and 
launch the program by double-clicking on it.

4.

Under the new path, open the readme.txt file and read the instructions pro-
vided there. Then launch setup.exe by double-clicking on it.

5.

In the dialog which appears, start the firmware update by pressing the 
[Firmware Update] button.

6.

The old and new firmware versions are displayed.

7.

A message is output indicating when the update process is complete. If 
you wish, you can repeat this procedure for other Gigaset M101 devices. If 
two Gigaset M101 devices are interconnected, they must both have either 
software version 1.yyy or 2.yyy. Ideally, all Gigaset M101 Data devices 
should be updated with the latest software version.

8.

When updating from version 1.yyy to 2.yyy, the registration procedure 
must be repeated for Gigaset M101 Data on Gigaset M101 Data and the 
lines configured accordingly.