Raritan Computer EMX2-111 Manual Do Utilizador
Chapter 2: Installing and Configuring the EMX Device
35
About Contact Closure Sensors
Raritan's contact closure sensor (DPX-CC2-TR) can detect the open-
and-closed status of the connected detectors/switches.
and-closed status of the connected detectors/switches.
This feature requires the integration of at least a discrete (on/off)
detector/switch to work properly. The types of discrete
detectors/switches that can be plugged into DPX-CC2-TR include those
for:
detector/switch to work properly. The types of discrete
detectors/switches that can be plugged into DPX-CC2-TR include those
for:
Door open/closed detection
Door lock detection
Floor water detection
Smoke detection
Vibration detection
Raritan does NOT produce most of the above detectors/switches except
floor water sensors. When using third-party probes, you must test them
with Raritan's DPX-CC2-TR to ensure they work properly.
floor water sensors. When using third-party probes, you must test them
with Raritan's DPX-CC2-TR to ensure they work properly.
Important: Integration and testing for third-party detectors/switches
is the sole responsibility of the customer. Raritan cannot assume
any liability as a result of improper termination or failure (incidental
or consequential) of third-party detectors/switches that customers
provide and install. Failure to follow installation and configuration
instructions can result in false alarms or no alarms. Raritan makes
no statement or claim that all third-party detectors/switches will
work with DPX-CC2-TR.
is the sole responsibility of the customer. Raritan cannot assume
any liability as a result of improper termination or failure (incidental
or consequential) of third-party detectors/switches that customers
provide and install. Failure to follow installation and configuration
instructions can result in false alarms or no alarms. Raritan makes
no statement or claim that all third-party detectors/switches will
work with DPX-CC2-TR.
Connecting Third-Party Detectors/Switches
There are two ways to connect third-party detectors/switches to the EMX
device:
device:
Connect the detectors/switches to DPX-CC2-TR, which will be
connected to a SENSOR port on the EMX device
connected to a SENSOR port on the EMX device
Connect the detectors/switches to the contact closure sensor
termination on the EMX device if your EMX device is EMX2-888
termination on the EMX device if your EMX device is EMX2-888