Raritan Computer EMX2-111 Manual Do Utilizador
Chapter 5: EMX Device Management
76
5. To change the temperature unit, select the desired option in the
Temperature Unit field.
: This option displays the temperature in Celsius.
: This option displays the temperature in Fahrenheit.
6. To change the length or height unit, select the desired option in the
Length Unit field.
Meter: This option displays the length or height in meters.
Feet: This option displays the length or height in feet.
7. To change the pressure unit, select the desired option in the
Pressure Unit field.
Pascal: This option displays the pressure value in Pascals (Pa).
A Pascal is equal to one newton per square meter.
psi: This option displays the pressure value in psi. Psi stands for
pounds per square inch.
8. Click OK to save the changes.
Determining How to Display Tree Items
By default the EMX web interface displays connected devices in the tree
only if there are devices physically connected to FEATURE and RS-485
(auxiliary) ports and displays nothing if no devices are connected.
only if there are devices physically connected to FEATURE and RS-485
(auxiliary) ports and displays nothing if no devices are connected.
The EMX web interface allows you to determine when and how to
display icons for connected and disconnected devices in the tree.
display icons for connected and disconnected devices in the tree.
How to Display Asset Sensors
There are two ways to display connected asset sensors in the tree of the
web interface:
web interface:
Asset sensors are displayed only when they are physically
connected.
connected.
Asset sensors are always displayed no matter they are physically
connected or not, but their icons change to indicate the connection
status.
connected or not, but their icons change to indicate the connection
status.
To determine how to display connected asset sensors:
1. Click the Feature Ports folder. The Feature Ports page opens in the
right pane, listing all FEATURE ports.
2. Select the number of the port that you want to configure, and click
Setup. Or you can simply double-click that port number. The Feature
Port Setup dialog for the selected port appears.
Port Setup dialog for the selected port appears.
3. In the Detection Mode field, select the way to display connected
asset sensors.