Raritan Computer EMX2-111 Manual Do Utilizador
Chapter 5: EMX Device Management
77
Disabled: When applied, disables to port and nothing connected
to the port is detected.
Auto: An icon is displayed for this port only when the EMX device
detects the physical connection of the asset sensor on this port.
Otherwise, nothing is displayed. This is the default approach.
Otherwise, nothing is displayed. This is the default approach.
Pinned: An icon is displayed for this port all the time, but the icon
image varies according to the connection status. If the
connection of an asset sensor is detected on a specific Feature
connection of an asset sensor is detected on a specific Feature
port, this icon
is displayed on that port. If not detected, this
icon
appears instead. See
Determining How to Display
Tree Items
(on page 76).
When the Pinned checkbox is selected, click the drop-down
arrow to select the device type to be displayed. Select Asset Strip
for asset sensors.
arrow to select the device type to be displayed. Select Asset Strip
for asset sensors.
4. Click OK to save the changes.
In the tree, the icon, if present, is followed by the device name if
available, device type and the port number.
available, device type and the port number.
How to Display LHX Heat Exchangers
There are two ways to display connected Schroff
®
LHX heat exchangers
in the tree of the web interface:
LHX heat exchangers are displayed only when they are physically
connected.
connected.
LHX heat exchangers are always displayed no matter they are
physically connected or not, but their icons change to indicate the
connection status.
physically connected or not, but their icons change to indicate the
connection status.
The EMX supports the LHX-20 and LHX-40 models.
Note: Schroff LHX Support must be enabled in order for the LHX to be
displayed. See
displayed. See
Enabling and Disabling Schroff LHX Heat Exchanger
Support
(on page 192).
To determine how to display connected LHX heat exchangers:
1. Click the Auxiliary Ports folder or the Feature Ports folder depending
on which port you want to connect the sensor to.
2. Select the number of the port that you want to configure, and click
Setup. Or you can simply double-click that port number. The
Auxiliary Port Setup dialog for the selected port appears.
Auxiliary Port Setup dialog for the selected port appears.
3. In the Detection Mode field, select the way to display connected LHX
heat exchangers.
Disabled: When applied, disables to port and nothing connected
to the port is detected.