2WIRE 3801HGV Manual Do Utilizador
Viewing HomePNA Status
66
HomePortal 3801HGV Gateway User Guide
Configuring LAN Devices
Viewing HomePNA Status
To view HomePNA status page, navigate to Settings > LAN > Wired Interfaces. Click HomePNA
Status listed at the bottom of the wired interfaces page. The following page appears:
Status listed at the bottom of the wired interfaces page. The following page appears:
Refer to the following table to understand the HomePNA Network parameters listed on the status
page:
Configuring DHCP
Objective
To configure Dynamic Host Configuration Protocol (DHCP) for setting up your private network. In this
task, we are listing the steps to configure the DHCP server.
task, we are listing the steps to configure the DHCP server.
DHCP allows dynamic allocation of network addresses. Your gateway can be both a DHCP client and
a DHCP server. When communicating with the local network devices, such as computers and
printers, your gateway functions as a DHCP server. However, while communicating with your ISP, the
gateway functions as a DHCP client.
a DHCP server. When communicating with the local network devices, such as computers and
printers, your gateway functions as a DHCP server. However, while communicating with your ISP, the
gateway functions as a DHCP client.
Parameter
Description
Firmware Version
Firmware version number.
Firmware Signature
Firmware signature number.
HPNA Physical Link
Displays whether the HPNA interface is enabled or disabled.
Network Mode
Network mode of the HPNA interface.
Node ID
Node ID of HPNA interface.
MTU
Maximum Transmission Unit is the maximum size allowed on data packets,
that are communicated on HPNA network.
that are communicated on HPNA network.
MAC Address
MAC address of the gateway.