2WIRE 3801HGV Manual Do Utilizador
Configuring DHCP
68
HomePortal 3801HGV Gateway User Guide
Configuring LAN Devices
Steps
1. Navigate to Settings > LAN > DHCP. The DHCP Configuration page appears.
2. Enable or disable the DHCP server by selecting or clearing the DHCP Server Enabled check
box.
3. Select a relevant radio button from DHCP Network Range, to use the default range of IP
addresses or configure the DHCP server manually. If you are using the default range of IP
address, continue to step 5. However, if you want a limited range of IP addresses, then go
to step 4.
address, continue to step 5. However, if you want a limited range of IP addresses, then go
to step 4.