TP-LINK 4.1.1 1910011002 Manual Do Utilizador

 

- 47 - 

time is up, the user will be automatically assigned a new dynamic IP address. The range of 

the time is 1 ~ 2880 minutes. The default value is 120 minutes. 

¾

 

Default Gateway - (Optional.) It is suggested to

 

input the IP address of the LAN port of the 

Router. The default value is 192.168.0.1. 

¾

 

Default Domain - (Optional.) Input the domain name of your network. 

¾

 

Primary DNS - (Optional.) Input the DNS IP address provided by your ISP or consult your 

ISP. 

¾

 

Secondary DNS - (Optional.) Input the IP address of another DNS server if your ISP 

provides two DNS servers. 

)

To use the DHCP server function of the Router, you must configure all computers on the LAN as 
"Obtain an IP Address automatically". 

Choose menu “DHCP  → DHCP Client List”, you can view the information about the clients 

attached to the Router in the screen as shown in Figure 4-28. 

 

Figure 4-28    DHCP Clients List 

¾

 

Client Name - The name of the DHCP client   

¾

 

MAC Address - The MAC address of the DHCP client   

¾

 

Assigned IP - The IP address that the Router has allocated to the DHCP client 

¾

 

Lease Time - The time of the DHCP client leased. After the dynamic IP address has expired, 

a new dynamic IP address will be automatically assigned to the user.     

You cannot change any of the values on this page. To update this page and to show the current 

attached devices, click the Refresh button. 

Choose menu “DHCP  → Address Reservation”, you can view and add a reserved address for 

clients via the next screen (shown in Figure 4-29).When you specify a reserved IP address for a 

PC on the LAN, that PC will always receive the same IP address each time when it accesses the 

DHCP server. Reserved IP addresses should be assigned to the servers that require permanent 

IP settings.