Lexmark 2480 Manual Do Utilizador

Each time you turn the power switch On, the printer 
performs an internal check, or Power-On Self Test.

Running the Printer Test produces a test printout that 
gives a visual indication of any problem the printer may 
be experiencing.

You can run the Printer Test with or without the printer 
being connected to your computer.

Make sure paper and the ribbon cartridge are 
installed. 

Turn the printer Off.

Press and hold LineFeed while you turn the 
printer On.

Release LineFeed when printing starts. 

Printing continues until you stop the printer.

Hex trace mode prints the control codes that are sent to 
the printer. Use trace mode to help diagnose 
software/driver problems. 

To enter trace mode: 

Make sure paper and the ribbon cartridge are 
installed 

Turn the printer Off. 

Press and hold Tractor while you turn the 
printer On.

Release Tractor when the lights go out. 

Turn the printer Off and back On to exit this 
mode.