Lexmark 2480 Manual Do Utilizador

Observe the operator panel lights and compare their 
status with the following table. The different patterns 
and combinations of lights provide you with 
information about the condition of your printer and 
whether you need to take action.

On 
On 
Off

Norm0al operating condition. No action required.

Normal offline condition.

On 
Off 
Blinking

Load paper.

Press Start/Stop. Paper Out light goes off; 
Ready light comes On.

If you installed the optional Tractor 2 Feeder 

and you are printing continuous forms, make sure the 
paper select lever is pushed down in the continuous 
forms position.

Blinking

The printer has data in the buffer to be printed.

Power
Ready
Paper Out
Panel Lock 
Font Lock 

On 
Blinking
Blinking
Blinking
Blinking

Check for a paper or ribbon jam.

Turn the printer Off. 

Remove the ribbon cartridge. For 
instructions, see “Removing the ribbon 
cartridge” on pag e142.

Check for paper dust or bits of paper.

Make sure the carrier packing tape has 
been removed. 

With the printer On, run the Printer Test. 
See “Testing the printer” on pag e116. 

If the Printer Test fails, call for service.

If the printer is not beeping, there is a 

power supply problem. Call for service.