Citrix Systems 6 Manual Do Utilizador
46
Parameter Name
Description
Required?
port
the network port number on which to query the target
no
usediscoverynumber
the specific iSCSI record index to use
no
incoming_chapuser
the username that the iSCSI filter will use to authenticate against
the host
the host
no
incoming_chappassword
the password that the iSCSI filter will use to authenticate against
the host
the host
no
To create a shared lvmoiscsi SR on a specific LUN of an iSCSI target use the following command.
xe sr-create host-uuid=
<valid_uuid>
content-type=user \
name-label=
<"Example shared LVM over iSCSI SR">
shared=true \
device-config:target=
<target_ip=>
device-config:targetIQN=
<target_iqn=>
\
device-config:SCSIid=
<scsci_id>
\
type=lvmoiscsi
Creating a Shared LVM over Fibre Channel / iSCSI HBA or SAS SR (lvmohba)
SRs of type lvmohba can be created and managed using the xe CLI or XenCenter.
Device-config parameters for lvmohba SRs:
Parameter name
Description
Required?
SCSIid
Device SCSI ID
Yes
To create a shared lvmohba SR, perform the following steps on each host in the pool:
1. Zone in one or more LUNs to each XenServer host in the pool. This process is highly specific to the SAN
equipment in use. Please refer to your SAN documentation for details.
2. If necessary, use the HBA CLI included in the XenServer host to configure the HBA:
• Emulex:
/bin/sbin/ocmanager
• QLogic FC:
/opt/QLogic_Corporation/SANsurferCLI
• QLogic iSCSI:
/opt/QLogic_Corporation/SANsurferiCLI
See
for an example of QLogic iSCSI HBA
configuration. For more information on Fibre Channel and iSCSI HBAs please refer to the
websites.
3. Use the sr-probe command to determine the global device path of the HBA LUN. sr-probe forces a re-scan of
HBAs installed in the system to detect any new LUNs that have been zoned to the host and returns a list of
properties for each LUN found. Specify the
properties for each LUN found. Specify the
host-uuid
parameter to ensure the probe occurs on the desired
host.
The global device path returned as the
<path>
property will be common across all hosts in the pool and
therefore must be used as the value for the
device-config:device
parameter when creating the SR.
If multiple LUNs are present use the vendor, LUN size, LUN serial number, or the SCSI ID as included in the
<path>
property to identify the desired LUN.