Vertex Standard VM-3500E Manual Do Utilizador
VM-3500E
Page 48
10.3 TIME LOCATION
This selection selects the time display between local time and UTC (time GPS
sends to radio). Time is displayed when GPS position (LAT/LON) is displayed
by pressing the [F] key followed by the [6(NAV)] key.
sends to radio). Time is displayed when GPS position (LAT/LON) is displayed
by pressing the [F] key followed by the [6(NAV)] key.
1. Press and hold down the [CALL/SET(MENU)] key
until “
Radio Setup
” menu appears.
2. Press the [ENT] key, then select “
Time Disp.
” in the
“
Radio Setup
” menu with the CHANNEL selector
knob.
3. Press the [ENT] key.
4. Turn the CHANNEL selector knob to select “
4. Turn the CHANNEL selector knob to select “
UTC
” or
“
Local
.”
5. Press the [ENT] key to store the selected setting.
6. To exit this menu and return to radio operation mode
6. To exit this menu and return to radio operation mode
press the [16/9] key.
n the local time mode, the display shows the time by the 12-hour system. Mean-
while, the display shows the time by the 24-hour system in the UTC mode.
while, the display shows the time by the 24-hour system in the UTC mode.
10.4 TRUE MAGNETIC CHANGE (NAV display)
This selection allows customizing the GPS COG (Course Over Ground) dis-
played on the LCD to be in True or Magnetic.
played on the LCD to be in True or Magnetic.
1. Press and hold down the [CALL(MENU)] key until
“
Radio Setup
” menu appears.
2. Press the [ENT] key, then select “
Magnetic
” in the
“
Radio Setup
” menu with the CHANNEL selector
knob.
3. Press the [ENT] key.
4. Turn the CHANNEL selector knob to select “
4. Turn the CHANNEL selector knob to select “
On
” (rep-
resenting “Magnetic”) or “
Off
” (representing “True”).
5. Press the [ENT] key to store the selected setting.
6. To exit this menu and return to radio operation mode
6. To exit this menu and return to radio operation mode
press the [16/9] key.
(“UTC” mode)
(“LOCAL” mode)