Vertex Standard VM-3500E Manual Do Utilizador
VM-3500E
Page 50
10.7 SCAN RESUME TIME (Depends on the transceiver version)
This selection is used to select the time the VM-3500E waits after a transmis-
sion ends before starting scanning.
sion ends before starting scanning.
1. Press and hold down the [CALL(MENU)] key until
“
Radio Setup
” menu appears.
2. Press the [ENT] key, then select “
SCAN Resume
” in
the “
Radio Setup
” menu with the CHANNEL selec-
tor knob.
3. Press the [ENT] key.
4. Turn the CHANNEL selector knob to select the de-
4. Turn the CHANNEL selector knob to select the de-
sired resume time. The resume time can be set to
“
“
1sec
,” “
2sec
,” “
3sec
,” or “
Off
.” In the “
Off
” selec-
tion, the scanner will resume after the other station
stops transmitting (carrier drops).
stops transmitting (carrier drops).
5. Press the [ENT] key to store the selected setting.
6. To exit this menu and return to radio operation mode press the [16/9] key.
6. To exit this menu and return to radio operation mode press the [16/9] key.
10.8 KEY BEEP (ON/OFF)
This selection allows the beep tone when a key is pressed to be turned off.
1. Press and hold down the [CALL(MENU)] key until
“
Radio Setup
” menu appears.
2. Press the [ENT] key, then select “
Key Beep
” in the
“
Radio Setup
” menu with the CHANNEL selector
knob.
3. Press the [ENT] key.
4. Turn the CHANNEL selector knob to select “
4. Turn the CHANNEL selector knob to select “
On
” or
“
Off
.”
5. Press the [ENT] key to set the key beep condition.
6. To exit this menu and return to radio operation mode
6. To exit this menu and return to radio operation mode
press the [16/9] key.
NOTE
Emergency alarm and beeps for DSC operation cannot be turned OFF.