PVI Industries PV500-43 Manual Do Utilizador
PV500-43
PVI Industries, LLC P.O. Box 7124 Ft. Worth, TX 76111 1‐800‐433‐5654
Page | 4 7/10
Power LED comes on and remains solid
LA starts flashing about once per second. This tells us that PIC (Peripheral Interface Controller)
number 1 in the ProtoCessor has powered up successfully.
LB starts flashing about once per second. This tells us that PIC number 2 in the ProtoCessor has
powered up successfully.
GP105 will go on solid within 45 – 60 seconds after power up, signifying normal operation.
ProtoCessor will be able to come up in RUINET shortly after this LED comes on. During the first
45‐60 seconds the LED should be dark.
45‐60 seconds the LED should be dark.
Upon successful operation of GP105 the ProtoCessor will go through diagnostics of the field port
communications.
The FFP‐ETH module is operational after this point.
RX Field Port LED: On normal operation, the RX LED will flash when a message is received on the
field port of the ProtoCessor.
TX Field Port LED: On normal operation, the TX LED will flash when a message is sent on the field
port of the ProtoCessor.
POWERING UP THE PROTOCESSOR/PROTONODE
PWR
GP105
LB
TX
RX
LA