Philips PPX4010/INT Manual Do Utilizador

Only use the supplied cable or cables that are available 
as accessories to connect the projector.

Dual USB to Micro USB cable

HDMI to Micro HDMI Cable

Cables available as accessories
MHL cable .................................... (PPA1240 / 253520048)
VGA cable .................................... (PPA1250 / 253447070)
Mini Display port cable ............. (PPA1270 / 253520069)

Use the HDMI to Micro HDMI cable to connect the 
projector to a computer or laptop.

1 Connect the HDMI cable to the projector's mini-

HDMI socket.

2 Connect the cable to the HDMI socket of the play-

back device.

3 Switch the projector on by connecting it to the 

power supply with the dual USB to Micro USB cable.

4 After the initial screen the connection is automati-

cally activated.

Use the VGA-Audio cable (available as an accessory) to 
connect the projector to a computer, laptop, etc.. The 
projector supports the following resolutions: VGA/
SVGA/XGA/WXGA. For best results, set the com-
puter’s resolution to WXGA.

1 Connect the VGA-Audio cable to the projector's 

mini-HDMI socket.

2 Connect the VGA plug to the computer's VGA 

socket. Do not connect audio plug, the function is 
not supported with the PPX4010.

3 Switch the projector on by connecting it to the 

power supply with the dual USB to Micro USB cable.

4 After the initial screen the connection is automati-

cally activated.

5 Adjust the computer's resolution to the correct set-

ting and switch the VGA signal to an external moni-
tor. The following resolutions are supported:

 

Many laptops do not activate the external 
video output automatically when you connect 
a second display such as a projector. Check 
your laptop's manual to find out how to acti-
vate the external video output.

VGA

640 x 480

60 Hz

SVGA

800 x 600

60 Hz

XGA

1024 x 768

60 Hz

WXGA

1280 x 768

60 Hz

You can obtain the best results with the 
WXGA resolution.

PPX_4010_UM_EN 253632830.book  Page 7  Mardi, 15. décembre 2015  5:02 17