Philips PPX4010/INT Manual Do Utilizador

Use a brush or lens cleaning paper for cleaning the lens 
of the projector.

A overheat symbol appears if the device is overheated. 
The device behaves as follows:

1 The fan turns to maximum level.

2 An overheating symbol appears on the screen and 

playback is interrupted.

3 The fan runs at maximum and after the device has 

cooled down, you can continue playback.

1 Prepare a USB key (not provided) and a Dual Female 

USB adaptor (not provided, see picture).

2 Before, copy the file «MSTFLASH.bin» to the root 

directory of USB key.

3 Connect USB key to Main USB port of USB Y cable 

via a USB dual female adaptor.

4 Connect micro USB port of Y cable to device. 

5 Connect USB port of thinner cable at Y side, to a 5V/

2A adaptor and connect to the wall outlet.

6 Waiting for 5 minutes, then your product start up 

and you can check the right down corner of screen, 
the version of FW have changed to new version.

Use a soft, lint-free cloth. Never use liquid or 
easily flammable cleansers (sprays, abrasives, 
polishes, alcohol, etc.). Do not allow any 
moisture to reach the interior of the device. 
Do not spray the device with any cleaning flu-
ids.

Wipe over the surfaces gently. Be careful that 
you do not scratch the surfaces.

Do not use any liquid cleaning agents for 
cleaning the lens, to avoid damaging the coat-
ing film on the lens.

PPX_4010_UM_EN 253632830.book  Page 9  Mardi, 15. décembre 2015  5:02 17