Lexmark C530 Guia Do Utilizador

When the process is finished, press 

.

Press 

 until 

 appears, and then press 

.

 appears briefly, followed by a clock, and then Ready appears.

This functionality is only available when a printer hard disk is installed and working properly.

Warning: All files and resources on the printer hard disk will be deleted. Resources residing in the printer flash
memory or RAM will not be affected.

Make sure the printer is turned off.

From the control panel, press and hold 

 and 

 while turning the printer on.

Release both buttons when Performing Self Test appears. The printer performs its power-on sequence,
and then CONFIG MENU appears.

Press 

 until 

 appears, and then press 

.

Press 

 until 

 appears, and then press 

.

 appears.

Press 

 until 

 appears, and then press 

.

A progress bar shows the amount completed.

When the process is finished, press 

.

Press 

 until 

 appears, and then press 

.

 appears briefly, followed by a clock, and then Ready appears.

You can use the control panel lockout functionality to create a PIN and choose specific menus to lock. Each time a
locked menu is selected, the user will be prompted to enter the correct PIN. The PIN does not affect access through
the Embedded Web Server.

To lock control panel menus:

Open a Web browser. In the address line, enter the IP address of the printer or print server to be protected using
the format: http://ip_address/.

Click Configuration.

Under Other Settings, click Security.

Click Menu Lockout Setup.

You can use the printer lockout functionality to create a PIN that must be entered in order to use the printer. When
the printer is locked, every print job it receives will buffer to the hard disk. To print the jobs, the user must enter the
correct PIN using the control panel.

Administrative support