Lexmark W810 Guia Do Utilizador

Paper handling

The printer determines the size paper loaded in the trays by the position of the left paper 
guide in trays 2 and 3. It can also sense the size of paper in tray 4 if you’ve installed an 
optional drawer. You cannot change the Paper Size for these trays from the operator panel 
menus.

Note: The optional 2500-sheet drawer is configured at the factory to support 

either letter or A4 size paper. The paper size configuration in this drawer 
can only be changed by configuring the DIP switches on the rear of the 
drawer. Contact Lexmark for more information about changing the size of 
paper supported by the optional 2500-sheet drawer.

Tray 1 does not have auto size sensing. If you load any size paper other than the default–
letter or A4–you’ll have to change the Paper Size setting for tray 1 from the Paper Menu. 

Selecting the correct Paper Type setting for a print job guarantees optimal print quality for 
that media. The paper type (as well as the paper size) must also be set correctly for tray 
linking to work as expected. (See page 100 for more information about tray linking.) Brief 
explanations of media appropriate to the Paper Type settings follow.

The Optra W810 does not require special paper for high quality output. Paper designed 
for use with xerographic copiers provide satisfactory print quality and feed reliability. 
Always try a sample of any paper you are considering using with the printer before buying 
large quantities.

Before loading paper, note the recommended print side identified on the paper package. 
Load paper with the recommended print side face up in the paper trays.