Lexmark W810 Guia Do Utilizador

Paper handling

The following papers are not recommended for use with this printer:

Rough, highly textured, limp, or pre-curled papers

Multipart forms

Chemically treated papers

Coated, synthetic, and thermal papers

Preprinted papers requiring a high degree of registration

Recycled paper less than 80 g/m²

Note: Colored papers must be able to withstand 190°C (400°F) fusing 

temperatures.

Always set the Paper Type to Transparency when printing transparencies. The printer 
then adjusts the fuser temperature to ensure the best possible print quality. For best 
results, use the following Lexmark transparencies with the Optra W810 printer:

These transparencies are designed to provide optimal print quality and feeding reliability 
when used with the printer. Using transparencies other than those recommended for the 
Optra W810, or printing transparencies without the Paper Type set correctly, may result in 
print quality problems. 

If you have ordered transparencies in the past for use with other Lexmark printers, do not 
use them with the Optra W810. Use only the recommended part numbers. 

Note: Be careful when handling transparencies. Fingerprints may affect toner 

adhesion. 

70X7240

Letter

12A5010

A4