Nokia 8850 Manual Suplementar

AT Command Set for Nokia 8850

+CNUM Subscriber Number

Returns MSISDNs from SIM. <speed>, <service> and <itc> are not supported by
NMP products. (GSM 07.07 section 7.1.)

Syntax:

AT+CNUM

Response is +CNUM: [<alpha1>],
<number1>, <type1>[, <speed>,
<service> [,<itc>]] [<CR> <LF>+CNUM:
[<alpha2>],
<number2>,<type2>[,<speed>,
<service>[,<itc>]] [...]]

AT+CNUM=?

Shows whether command has been
implemented.

Parameters:

<alphax>: optional alphanumeric string associated with <numberx>; used character
set should be the one selected with command Select TE Character Set +CSCS

<numberx>: string type phone number of format specified by <typex>

<typex>: type of address octet in integer format (GSM 04.08, subclause 10.5.4.7)

<speed>: as defined in subclause 6.7

<service>:

service related to the phone number:

asynchronous modem

synchronous modem

PAD Access (asynchronous)

Packet Access (synchronous)

voice

fax

also all other values below 128 are
reserved
<itc>:

information transfer capability:

3.1 kHz

UDI

+COLP Connected Line Identification Presentation

Controls presentation of +COLP intermediate result code or returns COLP
subscription status from network. If product does not support network status query,
<m> shall always equal 2. (GSM 07.07 section 7.8.)

Syntax:

AT+COLP=

Select bearer service type. The default
option is 0.

AT+COLP?

Query current setting.
Response is +COLP: <n>,<m>

AT+COLP=?

Show supported values.
Response is +COLP: (list of supported
<n>'s).

Parameters:

<n >:

parameter sets/shows the result code
presentation status in the TA:

disable

enable

<m >:

parameter shows the subscriber COLP
service status in the network:

COLP not provisioned

COLP provisioned

unknown (e.g. no network, etc.)