Integra dpc-7.4 Manual Do Utilizador

 

17

 

This section explains how to connect the DPC-7.4 to your TV 
or projector. 

In this hookup example, the TV handles the audio and video. 
If your TV has a Dolby Pro Logic decoder built-in, you’ll be 
able to enjoy DVDs and videos that bear the Dolby Surround 
logo.

To enjoy Dolby Digital or DTS (5.1-channel surround), 
you’ll need a compatible decoder (see page 18).

The DPC-7.4 has three types of video output: component 
video, S-Video, and composite video. Component video 
offers the best picture quality, so if your TV supports it, use 
a commercially available component video cable to connect 
the DPC-7.4’s COMPONENT video output to the compo-
nent video inputs on your TV. If your TV supports progres-
sive scanning, you must use component video in order to take 
advantage of that feature.

S-Video offers better picture quality than composite video, 
so if your TV supports it, use the supplied S-Video cable to 
connect the DPC-7.4’s S VIDEO output to an S-Video input 
on your TV. Failing that, use the supplied composite video 
cable to connect the DPC-7.4’s VIDEO output to a composite 
video input on your TV.

 

• Before making any connections, turn off the DPC-7.4 and 

your TV and disconnect their power cords from the wall 
outlets.

• Also refer to the connection information supplied with 

your TV.

• Connect the DPC-7.4’s video outputs directly to your TV. 

Don’t connect a VCR or other video equipment in between 
your DPC-7.4 and TV. Doing so may result in picture dis-
tortion, because of the copy protection system used on 
DVD-Videos.

• When you use the analog audio outputs, don’t play DTS 

CDs and don’t select DTS soundtracks on DVD-Videos. 
Doing so will produce unpleasant digital noise, which may 
damage your equipment.

• If your TV or projector has BNC component video inputs, 

use a BNC component video cable to connect them to the 
DPC-7.4’s BNC component video outputs.

(yellow)

(yellow)

(white)

(white)

(red)

(red)

Signal flow

*1 The DPC-7.4 has two composite video out-

put connectors and two pairs of stereo ana-
log audio output connectors. They output the 
same video and audio signals respectively.

*2 The DPC-7.4 has two S-Video output con-

nectors. They output the same video signal.

*3 The DPC-7.4 has two component video out-

puts. The COMPONENT 1 output uses 
RCA/phono connectors. The COMPO-
NENT 2 output uses BNC connectors. They 
output the same video signal.