Integra dpc-7.4 Manual Do Utilizador

 

18

 

This section explains how to connect the DPC-7.4 to a stereo 
hi-fi amp or receiver for better sound quality than that of most 
TVs. This is ideal for playing your audio CDs and MP3/
WMA discs in the DPC-7.4. DVD-Videos and Video CDs 
will sound better too. You can also enjoy Dolby Pro Logic, so 
long as your receiver supports it.

 

Use an RCA/phono audio cable to connect the DPC-7.4’s 
ANALOG AUDIO OUTPUTs to a pair of analog audio 
inputs on your hi-fi amp or receiver, as shown.

 

• When you use the analog audio outputs, don’t play DTS 

CDs or don’t select DTS soundtracks on DVD-Videos. 
Doing so will produce unpleasant digital noise, which may 
damage your equipment.

• The DPC-7.4 has two composite video output connectors 

and two pairs of stereo analog audio output connectors. 
They output the same video and audio signals respectively.

 

Use an optical (or coaxial) digital audio cable to connect the 
DPC-7.4’s OPTICAL (or COAXIAL) DIGITAL AUDIO 
OUTPUT to an optical (or coaxial) input on your hi-fi amp or 
receiver, as shown.

 

• Be sure to set the Digital Out–>Dolby Digital setting to 

“Dolby Digital>PCM” (see page 42). Otherwise an 
unpleasant digital noise may be heard, which may damage 
your equipment.

• Never connect the DPC-7.4 to the AC-3RF input on a 

Dolby Digital receiver. The AC-3RF format is not sup-
ported by the DPC-7.4.

To enjoy Dolby Digital or DTS surround sound, you need to 
connect one of the DPC-7.4 digital audio outputs to the dig-
ital input on a Dolby Digital or DTS decoder or an AV 
receiver with built-in decoders.

This hookup example will also allow you to enjoy Dolby Pro 
Logic, so long as your decoder or AV receiver supports it.

 

• In addition to a digital connection, we recommend also 

connecting using the stereo analog connection.
To record the audio from a CD-R disc etc. to a cassette or 
CDR recorder that’s connected to the AV receiver, and 
when your AV receiver has Zone2, you must connect the 
DPC-7.4’s analog audio outputs to the AV receiver.

• Make sure that the Digital Out > Dolby Digital setting to 

“Dolby Digital” (see page 42). Otherwise you won’t get 
surround sound.

• Also refer to the connection information supplied with 

your AV receiver or decoder.

• When playing Dolby Digital or DTS source material, be 

sure to select Dolby Digital or DTS decoding, respectively, 
on your AV receiver or decoder. See the relevant manuals.

• You can experience Dolby Digital only with DVDs that 

bear the Dolby Digital logo. Likewise, you can experience 
DTS only with DVDs or CDs that bear the DTS logo.

• When a DVD disc is loaded into the DVD player, the disc 

would default to Dolby digital format. For DTS playback 
you would need to select DTS in the table of contents of 
the movie. Usually in “Language” or in “Audio Setup”.

(white)

(white)

(red)

(red)

Signal flow

Connect one or the other

Signal flow

AV component with

Dolby Digital/DTS decoder

Connect one or the other

Signal flow