Integra dpc-7.4 Manual Do Utilizador
22
Basic Playback
This section explains how to load and remove discs.
Notes:
• You can load up to six discs. You don’t have to load all six
discs every time.
• When the disc tray is closed, all of the disc indicators
appear until the DPC-7.4 has checked each bay for the
presence of a disc. If a bay is found to have no disc, the
corresponding indicator disappears.
presence of a disc. If a bay is found to have no disc, the
corresponding indicator disappears.
• The disc tray can be opened and closed even while the
DPC-7.4 is in Standby mode, so you don’t have to turn it
on to load or remove your discs. (The disc tray may take
several seconds to open.)
on to load or remove your discs. (The disc tray may take
several seconds to open.)
• The DPC-7.4 supports 8 cm and 12 cm discs. To avoid
damaging your discs or DPC-7.4, always place discs in the
center of the disc bays.
center of the disc bays.
• Only load discs that are supported by the DPC-7.4 (see
page 7). Don’t load cartridge-type discs.
• To avoid personal injury, keep your hands away from the
disc tray as it closes.
• Always use the Open/Close [
] button to open and close
the disc tray. Never push the disc tray, and don’t touch it,
or obstruct it while it’s opening or closing. Don’t press
down on the disc tray while it’s open, and don’t load any-
thing other than supported discs. Doing so may damage
your discs or DPC-7.4.
or obstruct it while it’s opening or closing. Don’t press
down on the disc tray while it’s open, and don’t load any-
thing other than supported discs. Doing so may damage
your discs or DPC-7.4.
This section explains how to load and remove discs without
stopping playback.
stopping playback.
Loading & Removing Discs
1
Press the Open/Close [
] button.
The disc tray opens and the six disc num-
ber indicators appear on the display. A cir-
cle appears around the number of the disc
bay on the right.
ber indicators appear on the display. A cir-
cle appears around the number of the disc
bay on the right.
2
Place a disc, label side up, into
each bay.
each bay.
3
Press the [Disc Skip] button to
access the other disc bays.
access the other disc bays.
The disc tray turns counterclockwise two
bays at a time.
bays at a time.
4
When you’ve finished, press the
Open/Close [
Open/Close [
] button again.
The disc tray closes.
See page 23 for information on selecting
and playing discs.
and playing discs.
Tip:
If you press the Play [ ] button, the
disc tray will close and playback of the
disc in the right bay will start automati-
cally. If there is no disc in that bay, the
DPC-7.4 will check the other bays and
play the first disc it finds.
disc in the right bay will start automati-
cally. If there is no disc in that bay, the
DPC-7.4 will check the other bays and
play the first disc it finds.
Tip:
If you press one of the remote con-
troller’s Disc 1–6 buttons, the disc tray
will close and playback of the selected
disc will start automatically.
will close and playback of the selected
disc will start automatically.
+10
Disc 1
Disc
2
Disc
3
Disc
4
Disc
5
Disc
6
Disc Skip Progressive
Dimmer
Step/Slow
Clear
1
2
3
6
4
5
Setup
Top Menu
Return
Audio
Stop
Down
FF
FR
Up
Play
Pause
Angle Subtitle
RC-
543DV
Open/
Close
Close
On
Standby
Enter
7
8
9
0
Search
Last M Memory Chain Mode
Repeat
A-B
Random
Display
Menu
Chain
Mode
Play
Stop
Pause
Disc Skip
Open /Close
Enter
DPC-7.4
Play/Enter
Open/
Close
Close
Open/Close
Disc Skip
Disc1–6
Disc Skip
DVD
VCD
CD
MP3
WMA
JPEG
Open/
Close
Close
Open /Close
Remote controller
Disc Skip
Disc Skip
Remote controller
Remote controller
Open /Close
Open/
Close
Close
Loading Discs During Playback
1
Press the Open/Close [
] button.
The disc tray opens.
The disc that’s currently playing remains
inside the DPC-7.4 and its disc bay is
empty and won’t come to the front. To
remove this disc you must stop playback
before pressing the Open/Close [
inside the DPC-7.4 and its disc bay is
empty and won’t come to the front. To
remove this disc you must stop playback
before pressing the Open/Close [
]
button.
2
Load or remove discs as required,
and press the [Disc Skip] button to
access the other disc bays.
and press the [Disc Skip] button to
access the other disc bays.
The disc numbers appear onscreen. The
number of the disc bay on the right is
highlighted.
number of the disc bay on the right is
highlighted.
3
When you’ve finished, press the
Open/Close [
Open/Close [
] button again.
The disc tray closes.
Playback of the current disc continues
uninterrupted until you either stop play-
back or select another disc.
uninterrupted until you either stop play-
back or select another disc.
Tip:
If you press one of the remote con-
troller’s Disc 1–6 buttons, the disc tray
will close, playback of the current disc
will stop, and playback of the newly
selected disc will start automatically.
will close, playback of the current disc
will stop, and playback of the newly
selected disc will start automatically.
DVD
VCD
CD
MP3
WMA
JPEG
Open/
Close
Close
Open /Close
Remote controller
Disc Skip
Disc Skip
Remote controller
Remote controller
Open /Close
Open/
Close
Close