Integra dpc-7.4 Manual Do Utilizador
23
Basic Playback
—Continued
The section explains how to select loaded discs.
Notes:
• The type of disc currently selected is shown on the display:
DVD, VCD, or CD (see page 11).
• You can select discs while the DPC-7.4 is stopped or dur-
ing playback.
• You can use the [Disc Skip] button to skip the current disc
and start the next disc. If disc #6 is the current disc, disc #1
will be selected next.
will be selected next.
This section explains how to start, pause, and stop playback.
Notes:
• During playback, you can select chapters or tracks by
using the Up [
] and Down [
] buttons.
• When you stop playback of a DVD-Video or Video CD, the
DPC-7.4 remembers the point at which playback was
stopped and “Resume” appears onscreen for a few sec-
onds. To resume playback from that point, press the Play
[ ] button. To cancel the Resume function, press the Stop
[ ] button again. The Resume function is reset when
another disc is selected.
stopped and “Resume” appears onscreen for a few sec-
onds. To resume playback from that point, press the Play
[ ] button. To cancel the Resume function, press the Stop
[ ] button again. The Resume function is reset when
another disc is selected.
• With the Last Memory function you can resume playback
from a specific point even if the disc has been removed (see
page 37).
page 37).
• Do not move the DPC-7.4 or subject it to vibration during
playback. Doing so may damage your discs or DPC-7.4.
• You can improve the picture quality of paused playback
with the Pause/Still setting (see page 44).
Selecting Discs
Use the remote controller’s Disc
1–6 buttons to select loaded discs.
1–6 buttons to select loaded discs.
On the display, the number of the current
disc has a circle around it.
disc has a circle around it.
What happens next depends on the type of
disc you selected, as follows:
disc you selected, as follows:
DVD-Video:
Typically a menu appears
onscreen. See page 25.
Video CD:
Playback starts automatically.
Audio CD:
Playback starts automatically.
MP3/WMA/JPEG:
The Disc Navigator
appears onscreen. See page 27.
JPEG-only CD:
With some JPEG CDs,
picture thumbnails appear onscreen. See
page 31.
page 31.
+10
Disc 1
Disc
2
Disc
3
Disc
4
Disc
5
Disc
6
Disc Skip Progressive
Dimmer
Step/Slow
Clear
Setup
Top Menu
Return
Audio
Stop
Down
FF
FR
Up
Play
Pause
Angle Subtitle
RC-
543DV
Enter
7
8
9
0
Random
Display
Menu
Chain
Mode
Play
Stop
Pause
Disc Skip
Open /Close
Enter
DPC-7.4
Stop
Disc Skip
Disc1–6
Play/Enter
Play
Pause
Pause
Disc Skip
Stop
DVD
VCD
CD
MP3
WMA
JPEG
Disc 1
Disc
2
Disc
3
Disc
4
Disc
5
Disc
6
Remote controller
Starting, Pausing & Stopping Playback
■
Start
To start playback, press the Play
[ ] button.
[ ] button.
Playback starts and the Play
indicator
appears on the display.
If the disc is a DVD-Video or Video CD
with PBC (Playback Control), you may
need to start playback from a menu (see
page 25).
with PBC (Playback Control), you may
need to start playback from a menu (see
page 25).
The front panel Play [ ] button performs
play and enter functions. The remote con-
troller has separate Play [ ] and [Enter]
buttons.
play and enter functions. The remote con-
troller has separate Play [ ] and [Enter]
buttons.
■
Pause
To pause playback, press the
Pause [ ] button.
Pause [ ] button.
Playback pauses and the Pause
indica-
tor appears on the display.
To resume playback, press the Play [ ]
button.
button.
Playback resumes and the Pause
indica-
tor disappears.
■
Stop
To stop playback, press the Stop
[ ] button.
[ ] button.
Playback stops and the Play
indicator
disappears.
DVD
VCD
CD
MP3
WMA
Play
Enter
Play
Remote controller
Pause
Pause
Remote controller
Stop
Stop
Remote controller