Fujifilm S100FS Manual Do Utilizador

81

f Taking pictures continuously

A Press f to display the continuous shooting setting 

screen.

[f TOP 7 (RAW 3)]: Continuous shooting
[

 

TOP503]: High speed continuous shooting

[

 DYNAMIC RANGE BKT]: Dynamic range bracketing

[

 FILM SIMULATION BKT]: Film simulation bracketing

[j AE BKT]: AE bracketing
[k LAST 7(RAW 3)]: Cycle continuous shooting
[h LONG PERIOD]: Long period continuous shooting

• Shooting continues as long as holding the shutter 

button down. In [DYNAMIC RANGE BKT], [FILM 
SIMULATION BKT] and [AE BKT] modes however, just 
press the shutter button once to shoot 3 frames.

• Number of available frames is limited depending on the 

available space on the Memory Card or internal 
memory. In [DYNAMIC RANGE BKT], [FILM 
SIMULATION BKT] and [AE BKT] modes, if there is 
insufficient space on the Memory Card or internal 
memory to record 3 frames, no pictures are taken.

• The focus is determined in the first frame and cannot be 

changed in mid-sequence (except for [LONG 
PERIOD]). 

• The exposure is determined in the first frame, but in 

[LONG PERIOD] continuous shooting the exposure is 
adjusted for the scene being shot. 

• The speed of continuous shooting varies depending on 

the shutter speed.

• The flash cannot be used as the flash mode is set to 

Suppressed flash. However, when the mode is changed 
back to normal photography, the flash setting specified 
before continuous shooting was selected is restored.

• For [TOP 7 (RAW 3)], [TOP50 3], [DYNAMIC RANGE 

BKT], [FILM SIMULATION BKT], [AE BKT] and [LAST 
7(RAW 3)], the results are always displayed after you 
shoot. Note that pictures taken using [LONG PERIOD] 
continuous shooting are recorded without displaying 
the results.

• In [LAST 7(RAW 3)] and [LONG PERIOD] modes, only 

1 frame can be shot when using with the Self-timer 
mode.

• File recording time using [TOP 7 (RAW 3)], [TOP50 

3], [DYNAMIC RANGE BKT], [FILM SIMULATION 
BKT], [AE BKT] or [LAST 7(RAW 3)] may increase 
when recording to a Memory Card or internal memory.

Use this mode to take pictures of a moving subject.

B Rotate the command dial to 

select the Continuous 
shooting mode, while 
pressing f. Release f to 
set your selection.