Zanussi ZEI6740BBA Manual Do Utilizador

automatically if:
• All cooking zones are deactivated.

• You do not set the heat setting after you

activate the hob.

• You spill something or put something on the

control panel for more than 10 seconds (a

pan, a cloth, etc.). An acoustic signal sounds

and the hob deactivates. Remove the object

or clean the control panel.

• The hob gets too hot (e.g. when, a saucepan

boils dry). Let the cooking zone cool down

before you use the hob again.

• You use incorrect cookware. The symbol 

comes on and the cooking zone deactivates

automatically after 2 minutes.

• You do not deactivate a cooking zone or

change the heat setting. After some time 

comes on and the hob deactivates. See

below.

•

, 1 - 2— 6 hours

• 3 - 4 — 5 hours

• 5 — 4 hours

• 6 - 9 — 1.5 hours

To set or change the heat setting:
Touch the control bar at the correct heat setting

or move your finger along the control bar until

you reach the correct heat setting.

This function makes more power available to the

induction cooking zones. The function can be

activated for the induction cooking zone only for

a limited period of time. After this time the

induction cooking zone automatically sets back

to the highest heat setting.

Refer to “Technical information”

chapter.

To activate the function for a cooking
zone: touch  .   comes on.
To deactivate the function: change the heat

setting.

Count Down Timer

You can use this function to set how long the

cooking zone operates for only this one time.
First set the cooking zone then set the

function. You can set the heat setting before

or after you set the function.

To set the cooking zone: touch   again and

again until the indicator of a necessary cooking

zone comes on.
To activate the function or change the
time: touch   or   of the timer to set the

time (00 - 99 minutes). When the indicator of

the cooking zone starts to flash slowly the time

counts down.
To see the remaining time: set the cooking
zone with  . The indicator of the cooking zone

starts to flash quickly. The display shows the

remaining time.
To deactivate the function: set the cooking
zone with   and touch  . The remaining time

counts back to 00. The indicator of the cooking

zone goes out.

When the time comes to an end, the

sound operates and 00 flashes. The

cooking zone deactivates.

To stop the sound: touch  .
Minute Minder

You can use this function as a Minute Minder

when the hob is activated and the cooking

zones do not operate (the heat setting display
shows  ).

To activate the function: touch  . Touch 
or   of the timer to set the time. When the

time comes to an end, the sound operates and 

00 flashes.

To stop the sound: touch  .