buell s1 lightning '97 Manual

 

1.

 Test AC output.

a.  Disconnect voltage regulator wiring at connector

[P17].

b. 

Connect an AC voltmeter across both stator sockets. 

c. 

Run the engine at 2000 RPM. The AC output should
be 38-52 volts AC.

2.

Compare test results to specifications.

a.  If the output is below specifications, charging prob-

lem could be a faulty rotor or stator. 

b.  If output is good, charging problem might be faulty

regulator/rectifier. Replace as required.

3.

Check the output again as described under 

.

5685a