bobcat s205 Manual Do Utilizador

The right instrument panel shown [Figure 7] is the
Keyless Panel.

1.

Display Panel: The Display Panel is where all system
setup, monitoring, troubleshooting, and error
conditions are displayed.

2.

Function Icons: The lower left area of the Keyless
Panel has the same Icons as the Key Switch Panel.
These Icons are only visible when the monitoring
system has detected an error.

3.

Selection Buttons: The four Selection Buttons allow
you to select items from the Display Panel and scroll
through screens.

4.

Keypad: The numeric keypad (4) [Figure 7] has two
functions:

To enter a number code (password) to allow starting
the engine (Keyless Start).

To enter a number as directed for further use of the
Display Panel.

The first screen you will see on your new loader will be as
shown in [Figure 8].

When this screen is on the display you can enter the
password and start the engine or change the Display
Panel setup features.

Panel) will have an Owner Password. Your
dealer will provide you with this password.
Change the password to one that you will
easily remember to prevent unauthorized use
of your loader. (See Panel Setup on Page 112.)
Keep your password in a safe place for future
needs.

Start Engine: Use the Keypad to enter the numbers
(letters) of your password and press the RUN / ENTER
key (5) [Figure 7].

Press and hold the START Button (6) [Figure 7] until the
engine starts.

Change Language: Press the Selection Button at the end
of the arrow [Figure 8] to go to the next screen.

B-15553B

B-16165