Fujitsu S510 Manual Do Utilizador

 

14  

If you use the Carrier Sheet, you can scan large documents 
such as A3 and B4 size documents, and documents of 
irregular shapes such as clippings of newspaper. 

3.4.1. Creating Facing Pages in One Image 

Fold the document in half, scan it in duplex scanning mode, 
and then merge both front and back side images to make a 
double-page spread image. 

When you scan with the Carrier Sheet, a detection 
error likely occurs in the folded portion, which may lose 
part of the page image. Therefore, this function is not 
recommended for scanning where accuracy is critical.

 
Here, as an example, this section explains how to scan an 
A3-size document. 
If you are scanning an A3 document, it is not possible to 
load it onto the scanner as it is. Fold the document in half 
and scan it following the procedure below. 

1.  Spread the page to be scanned facing outwards and 

fold it in half from the center. 

Fold it tightly and smooth out the crease so that the 
folded portion does not appear puffed. 

 

2.  Open the Carrier Sheet and place the folded 

document inside. 

Align the fold with the right 
edge of the Carrier Sheet 
so that the document fits 
into the Carrier Sheet at 
the upper corner. 

3.  Load the Carrier Sheet onto the ScanSnap. 

●  Load the Carrier Sheet 

with the portion striped in 
black and white as the 
leading edge as shown in 
the right figure. 

●  When the Carrier Sheet is 

used for scanning, 
continuous scanning is not 
possible. Scan one piece 
or one sheet at one time. 

 

 

 

 

4.  Press the [SCAN] button. 

 The front and back 

images are merged into 
a double-page spread 
image. 

 

HINT

The loading method and ScanSnap Manager’s 
settings differ according to the documents to be 
scanned. Refer to “ScanSnap S510 
Operator’s Guide” on the “ScanSnap Setup 
CD-ROM” for details. 

3.4.2. Scanning irregular-shaped Documents 

This section explains how to scan documents that are 
difficult to scan as it is. 

1.  Right-click the ScanSnap Manager icon 

  on the 

taskbar and select [SCAN Button Settings]. 

 

 The "ScanSnap Manager - Scan and Save Settings" 

dialog box appears. 

2.  On the [Paper size] tab, click the 

"

Carrier Sheet 

Settings…

"

 button.   

 

The "Carrier Sheet Settings" dialog box appears. 

3.  On the "Carrier Sheet Settings" window, select 

"Create front and back images separately" in the 
"Mode" drop-down list, and then click the [OK] 
button. 

4.  Open the Carrier Sheet and place the document 

inside. 

Neatly align the top of the 
material with the top of the 
Carrier Sheet. Center the 
material so that it is 
entirely contained in the 
Carrier Sheet.