Fujitsu m3099ex-eh Manual Do Utilizador
![Fujitsu](https://files.manualsbrain.com/attachments/6c4642b33d2edbd09f94719c20a133aa0e862902/common/fit/150/50/80a45702a21fefb1823bce6851e87db450dccf7792cb572ebc8a90330a68/brand_logo.png)
M3099EX/EH OEM Manual
A-5
ENDORSER
A3. Print head
handling
A3.1 Replacing the print head
When “INK EMPTY” is displayed in LCD display, the operator is
responsible to change the print head as follows.
responsible to change the print head as follows.
1 Open and remove the endorser cover at the
rear top corner of the scanner. Power of the
scanner will turn off, if the power is on at cover
open.
scanner will turn off, if the power is on at cover
open.
2 Turn the print head lock lever up, then replace
the print head.
3 Attach the new print head in the endorser and
turn the print head lock lever back.
4 Close the endorser cover back.
5 Reset the print head life counter by the
procedure stated in section A2.5. (See
NOTICE)
NOTICE)
You can test the printing by the procedure in
section A2.6
section A2.6
NOTICE: The reset of the print head life counter is important to correctly
detect the life of the new print head.
Endorser cover
Print head
lock lever
lock lever
Print head
or