Fujitsu fi-5120C Manual Do Utilizador

2

■ Removable Parts

Parts that can be removed from the scanner are dis-

played below.

The operator panel is located on the right side of the 

scanner. This panel comprises  of a Function Number 

display, four buttons and a LED.

*) About the settings on the launcher, refer to FUJITSU 

TWAIN32 scanner driver help and the "fi-5120C/fi-
5220Cfi-5120C/fi-5220C Operator’s Guide" in the Setup 

CD-ROM.

■ Indications on the Function 

Pad ASSY

ADF paper chute

Pick roller

Sheet guide

Document cover

Can be
removed

[fi-5220C only]

Function  
Number 
display

Function

Send to

Scan

LED

Power button

Function Number display

Indicates the function Num-
ber and error status.

Buttons

Function

Changes the Function acti-

vated by the Send to button 
(*).

Send to

Launches the linked applica-

tion software (*).

Scan

Power button

Turns the scanner ON and 
OFF.

LED

-

Lights when the scanner is 

turned ON.

Lights only one time upon turning on the scanner.

Indicates that the scanner has been turned ON and 

is being initialized.

Indicates that initialization will soon be completed.

Indicates that initialization has been completed 

successfully.
This status is called "Ready Status". 

Indicates that a temporary error occurred when 

documents were being scanned. A number appear-

ing in alternation following the U  (i.e., 1 or 2, etc.) 
refers to the type of error.

To return the scanner to the ready status ("1"), 

press "Scan" or "Send to" button.

Indicates that a device (hardware) alarm has 
occurred during scanning of documents.

"E" and the alarm Number (0 to 9, A,c,d and F) 

will appear alternately.
To return the scanner to the ready status ("1"), 

press "Scan" or "Send to" button.

If this alarm occurs, turn the power off and on 
again. If the alarm continues after turning the 

power on again, contact your service engineer.