Fujitsu fi-5120C Manual Do Utilizador

fi-5120C/fi-5220C Image Scanner Getting Started 

3

1. Place the scanner at its installation site.

For details on the scanner's dimensions and 

required installation space, refer to "fi-5120C/fi-

5220C Operator’s Guide" "7.2 Installation Speci-

fications" in the Setup CD-ROM.

For fi-5120C, go to Step 3.

2. Unlock the Shipping lock.

The carrier unit inside the scanner is fixed in 

place by the shipping lock to prevent the scanner 

from becoming damaged during transportation 

from the factory.

After transporting and placing the scanner, tilt the 

scanner (approx. 30 degrees) and release the 

Shipping lock on the bottom of the scanner.

3. Attach the ADF paper chute.

Hold the ADF paper chute and insert its tabs into 

the corresponding slots in the scanner as shown in 

the next figure below.

The Side guides of the ADF paper chute have to 

face up. 

4. Connect the AC adapter.

1) Connect the AC cable to the AC adapter.

2) Connect the AC adapter connector to the scan-

ner’s DC inlet.

3) Plug the AC cable into the outlet.

Approx.30 
degrees

Lock

Release

ATTENTION

Use only the AC adapter provided by the 
manufacturer.

HINT

The Function Number Display and the LED 
may flash for an instant when plugging the 
AC cable into the outlet. 

ADF paper chute

Tab

Side guide