eutech-instruments cyberscan con 11 conductivitytds meter Manual Do Utilizador
Instruction Manual
CON 11/110
46
8.6.2 P5.2: User Reset
This reset function clears all the calibrations, memory and
all other setup parameters that you have changed back to
factory defaults condition.
From measurement mode
all other setup parameters that you have changed back to
factory defaults condition.
From measurement mode
1. Repeat step 1 to 4 to enter the calibration reset
selection mode.
2. Press
the
MI/▲ or MR/▼ keys to select NO.
3. Press the HOLD/ENTER key to enter parameter
P5.2. The upper display will show “USr”.
4. Press the HOLD/ENTER key again to enter user
reset selection mode.
5. Press the MI/▲ or MR/▼ keys to toggle between
NO and YES.
•
•
NO retains current settings
•
YES resets to factory default settings.
6. Press the HOLD/ENTER key after confirming reset
selection and to return to the measurement mode.
Otherwise press CAL/MEAS key to return to
measurement mode without resetting to factory
default.
Otherwise press CAL/MEAS key to return to
measurement mode without resetting to factory
default.
NOTE: See page 69 and 70 for Factory Default
Settings.
Settings.
SETUP
cal
yes
SETUP
SETUP
SETUP
P 5.2
ENTER
HOLD
ENTER
HOLD
MI
MR
Figure 39: P5.2-Clear
all setups to factory
default