Autostart AS2402 Manual Do Utilizador

User Guide 

P. 3 

Remote-starting Your Vehicle 
Remote-starting 

Press the 

Ι button for approx. 1 second. The parking lights will come on, informing you that 

the unit has received your signal. Approx. 5 seconds later, the engine will start. The parking 

lights will remain on during the pre-programmed run time. 

If the vehicle doesn’t start the first time, the system will shut down, wait a few seconds, and 

try to start the engine again. It will try to start the engine 3 times before giving up. 
Driving Off 

Enter the vehicle and do the following: 

•  Turn the ignition key to the 

 position. 

•  Press the brakes to disengage the remote starter unit. 

You are now ready to drive off. 
Note: Press button 

Ι to 

the module and to 

 the doors (if button 

Ι is 

programmed as 

 or 

 button). 

Caution: do not turn the key to the 

 position with the engine running. This will cause 

the starter motor to re-engage, unless your vehicle is equipped with the Start Kill / Anti-

Grind Feature (Optional). 

Remote Starter Features 
Idle Mode 

This feature allows the user to engage the remote starter to take over the vehicle while it is 

already running with the key in the 

switch. The vehicle will keep running for the pre-

programmed run time, or until it is shut down by remote. 

Caution: Do not leave children or pets unattended in a car running in Idle Mode. 

 

To enable Idle Mode, press and hold button 

Ι

on your remote transmitter while the engine is 

running.  
Note:  When enabling Idle Mode, pressing 

button

Ι

 

will automatically unlock the doors (if 

button 

Ι is programmed as 

 or 

 button.) 

The parking lights will come on. Remove the key, exit the vehicle and lock the doors (if 

desired). The engine will continue running and will turn itself 

 when the pre-programmed 

run time expires. 
Valet Modes 

Ignition Valet 

The system can be placed in Valet Mode to disable the remote starting capabilities. If the 

vehicle needs to be serviced, or if you park it indoors, Valet Mode will prevent the engine 

from being accidentally started by remote control. 

 

1.  With the key in the Ignition switch, turn the key to the 

and then 

positions 5 times within 10 seconds. 

2.  The Parking Light will flash 3 times indicating the Module is now in Valet Mode.  

The LED will turn

 on

 solid 

1.  With the key in the Ignition switch, turn the key to the 

and then 

positions 5 times within 10 seconds.