TP-LINK TL-MR3420 Manual Do Utilizador

 

This chapter will show you how to configure the basic functions of your 3G/4G Wireless N 

Router using Quick Setup Wizard within minutes. 

The default IP address of the 3G/4G Wireless N Router is 192.168.0.1. And the default Subnet 

Mask is 255.255.255.0. These values can be changed as you desire. In this guide, we use all 

the default values for description. 

Connect the local PC to the LAN ports of the Router. And then you can configure the IP address 

for your PC in the following two ways. 



 

Configure the IP address manually 

1)  Set up the TCP/IP Protocol for your PC. If you need instructions as to how to do this, 

2)  Configure the network parameters. The IP address is 192.168.0.xxx ("xxx" is any number 

from 2 to 254), Subnet Mask is 255.255.255.0, and Gateway is 192.168.0.1 (The Router's 

default IP address) 



 

Obtain an IP address automatically 

1)  Set up the TCP/IP Protocol in "Obtain an IP address automatically" mode on your PC. If 

you need instructions as to how to do this, please refer to 

2)  Then the built-in DHCP server will assign IP address for the PC. 

 

If you are trying to connect to TL-MR3420 wirelessly, please refer to the label on the bottom of 
the Router for the Wireless Password.

 

1.  To access the configuration utility, open a web-browser and type in the default address 

 in the address field of the browser. 

 

Figure 3-1    Login the Router 

After a moment, a login window will appear, similar to the Figure 3-2. Enter admin for the User 

Name and Password, both in lower case letters. Then click the OK button or press the Enter 

key. 

-7-