TP-LINK TL-MR3420 Manual Do Utilizador

 

c).  You will see the following screen when the new device successfully connected to the 

network. 

 

 

 

1) 

The status LED on the Router will light green all the time if the device has been 
successfully added to the network. 

2) 

The WPS function cannot be configured if the Wireless Function of the Router is disabled. 
Please make sure the Wireless Function is enabled before configuring the WPS.

 

 

Figure 4-4    the Network menu 

There are five submenus under the Network menu ( as shown in Figure 4-4): Internet Access, 

3G/4G, WAN, MAC Clone and LAN. Click any of them, and you will be able to configure the 

corresponding function.   

Choose menu “Network→Internet Access”, you can configure the access mode on the screen 

below. The Router is designed to work with either WAN port or 3G/4G USB modem, and 

supports “automatically take over back up with 3G/4G access” as Ethernet WAN failover. 

 

Figure 4-5  Internet Access 

-21-