TP-LINK TL-MR3420 Manual Do Utilizador

 



  TCP-SYN-FLOOD Packets Threshold (5~3600) - The default value is 50. Enter a value 

between 5 ~ 3600. When the current TCP-SYN-FLOOD Packets numbers is beyond the 

set value, the Router will startup the blocking function immediately.   



  Ignore Ping Packet From WAN Port - Enable or Disable Ignore Ping Packet From WAN 

Port. The default setting is disabled. If enabled, the ping packet from the Internet cannot 

access the Router.   



  Forbid Ping Packet From LAN Port - Enable or Disable Forbid Ping Packet From LAN 

Port. The default setting is disabled. If enabled, the ping packet from LAN cannot access 

the Router. This function can be used to defend against some viruses.   

Click the Save button to save the settings. 

Click the Blocked DoS Host List button to display the DoS host table by blocking.   

Choose menu “Security  → Local Management”, you can configure the management rule in 

the screen as shown in Figure 4-44. The management feature allows you to deny computers in 

LAN from accessing the Router. 

 

Figure 4-44 Local Management 

By default, the radio button “All the PCs on the LAN are allowed to access the Router's 

Web-Based Utility” is checked. If you want to allow PCs with specific MAC Addresses to 

access the Setup page of the Router's Web-Based Utility locally from inside the network, check 

the radio button “Only the PCs listed can browse the built-in web pages to perform 

Administrator tasks”, and then enter each MAC Address in a separate field. The format for the 

MAC Address is XX-XX-XX-XX-XX-XX (X is any hexadecimal digit). Only the PCs with MAC 

address listed can use the password to browse the built-in web pages to perform Administrator 

tasks while all the others will be blocked.   

After click the Add button, your PC's MAC Address will be placed in the list above. 

Click the Save button to save your settings.   

-57-