VIZIO TL-WR641G Manual Do Utilizador

 

 

- 15 - 

 

Figure 4-2 

There are three submenus under the Network menu (shown in Figure 4-2): LAN,  WAN and 

MAC Clone. Click any of them, and you will be able to configure the corresponding function. 

The detailed explanations for each submenu are provided below. 

You can configure the IP parameters of LAN on this page.   

 

Figure 4-3 

¾

  MAC Address  - The physical address of the router, as seen from the LAN. The value 

can't be changed. 

¾

  IP Address - Enter the IP address of your router in dotted-decimal notation (factory 

default: 192.168.1.1). 

¾

  Subnet Mask - An address code that determines the size of the network. Normally use 

255.255.255.0 as the subnet mask.   

)

1)  If you change the IP Address of LAN, you must use the new IP Address to login the router.   

2)  If the new LAN IP Address you set is not in the same subnet, the IP Address pool of the 

DHCP server will not take effect, until they are re-configured. 

3)  If the new LAN IP Address you set is not in the same subnet, the Virtual Server and DMZ 

Host will change accordingly at the same time. 

You can configure the WAN port parameters on this page. 

First, please choose the WAN Connection Type (Dynamic IP/Static IP/PPPoE/802.1X + 

Dynamic IP/802.1X + Static IP/Big Pond Cable/L2TP/PPTP) for Internet. The default type is