VIZIO TL-WR641G Manual Do Utilizador

 

 

- 26 - 

Otherwise, enter the number of minutes you want to have elapsed before your Internet 

connection terminates. 

Caution: Sometimes the connection cannot be disconnected although you specify a time 

to Max Idle Time, since some applications are visiting the Internet continually in the 

background. 

¾

  Connect Automatically - Connect automatically after the router is disconnected. To use 

this option, click the radio button. 

¾

  Connect Manually - You can configure the router to make it connect or disconnect 

manually. After a specified period of inactivity (Max Idle Time), the router will disconnect 

from your Internet connection, and you will not be able to re-establish your connection 

automatically as soon as you attempt to access the Internet again. To use this option, click 

the radio button. If you want your Internet connection to remain active at all times, enter "0" 

in the Max Idle Time field. Otherwise, enter the number in minutes that you wish to have 

the Internet connecting last unless a new link is requested. 

)

Sometimes the connection cannot be disconnected although you specify a time to Max Idle Time, 

since some applications are visiting the Internet continually in the background. 

You can configure the MAC address of the WAN port on this page, Figure 4-13: 

 

Figure 4-13 

Some ISPs require that you register the MAC Address of your adapter, which is connected to 

your cable/DSL Modem or Ethernet during installation. Changes are rarely needed here. 

WAN MAC Address - This field displays the current MAC address of the WAN port, which is 

used for the WAN port. If your ISP requires that you register the MAC address, please enter the 

correct MAC address into this field. The format for the MAC Address is XX-XX-XX-XX-XX-XX (X 

is any hexadecimal digit).   

¾

  Your PC's MAC Address - This field displays the MAC address of the PC that is 

managing the router. If the MAC address is required, you can click the Clone MAC 

Address button and this MAC address will fill in the WAN MAC Address field.