Vocopro Cassette Deck Manual Do Utilizador

Every cassette can be protected against accidental erasing of 
pre-recorded material. On the back of a cassette are two 
breakout tabs. These must be in place before the RECORD 
button will depress. If these tabs have been removed, 
such as on pre-recorded cassette you buy, the RECORD 
button will not depress. To record using a cassette which 
has the breakout tabs removed, place a piece of tape over 
the exposed holes, this will allow the interlocking device 
to engage

Once you have made a recording, you can prevent an accidental erasing by breaking out and removing the 
tabs. With side 1(A) facing you, erasing is prevented by breaking out the tab on the right, and side 2(B) by the 
tab on the left (see drawing).

            To prevent fire or shock hazard, disconnect your stereo system from the AC power plug when cleaning.

• The finish on our stereo may be cleaned with a dust cloth and cared for as other furniture. Be careful when 
   cleaning and wiping the plastic parts. Mild cleaners, such as dishwashing detergent, with dampened (not 
   wet) cloth may be used on the front panel.

• To get the best sound from your tapes, the pressure roller, capstan, play/record and erase heads should be 
   cleaned regularly. The build up of iron oxide particles is often severe with inferior tapes and will reduce the 
   performance or the system. After every 100 hours of use, or more often if playback has become poor, clean 
   the play/record and erase heads, capstan and pressure roller. To clean them, wipe dry with a soft, clean 
   cloth. 

Cassette Record/Playback

Cassette Playback

 

 

NOTE: Never use any metal objects on or near the tape head. Do not allow any cleaning material to fall into 
  tape assembly. Do not use carbon tetrachloride as a cleaning agent..

Near Side 2(B)

Erase
Head

Pressure
Roller

Play/Record
Head

Capstan

Break tab

Far Side 1(A)

Tape
Guard

Pressure
Roller

play
head

Capstan