Fujitsu MAN3367 Manual Do Utilizador
C141-E124-01EN
5 - 10
Table 5.2
Sense and subsense codes (5 of 5)
C*
Q*
Name
Explanation
Sense
key
45
00
Select/Reselect failure
A response wait time-out from the INIT was detected in the
RESELECTION phase.
RESELECTION phase.
B
47
00
SCSI parity error
A parity error was detected on the SCSI data bus.
B
48
00
INITIATOR DETECTED
ERROR message received
ERROR message received
The INITIATOR DETECTED ERROR message was received
from the INIT.
from the INIT.
B
49
00
Invalid message error
An unsupported or inappropriate message was received.
B
4C
nn
Logical unit failed self-
configuration
configuration
The IDD's initial setup failed. ('nn' is the Fujitsu unique code
(80 to FF))
(80 to FF))
4
4D
nn
Tagged overlapped
command
command
Before completing one command execution, new command
having the same tag number was issued to the same logical unit.
(nn=queue tag number)
having the same tag number was issued to the same logical unit.
(nn=queue tag number)
B
4E
00
Overlapped commands
attempted
attempted
1) Before execution of an untagged command was completed,
the same INIT issued a new command to the same LUN.
2) Before execution of a tagged command was completed, the
same INIT issued a command to the same LUN with the same
tag. Or, an untagged command was issued when not in the
sense hold state.
tag. Or, an untagged command was issued when not in the
sense hold state.
B
55
04
Insufficient Registration
Resource
Resource
PERSISTENT RESERVATION OUT command is issued from
insufficient device server resource.
5
01
Spindle synchronized
The rotational synchronization operation was completed.
6
5C
02
Spindle not synchronized. Rotational synchronization deviated.
6
5D
nn
SMART predictive failure SMART related sense data
x
12:
The read error rate attribute has reached the failure
threshold.
threshold.
x
14:
The frequency of grown defect allocation attribute has
reached the failure threshold.
reached the failure threshold.
x
43:
The seek error rate attribute has reached the failure
threshold.
threshold.
x
56:
The spin up time attribute has reached the failure
threshold.
threshold.
x
64:
The remaining alternate sector count attribute has reached
the failure threshold.
the failure threshold.
x
FF: The drive is in test mode.
0, 1, 6
90
00
Initiator's SCSI ID not
identified
identified
Since the SCSI ID of the INIT was not notified in the
SELECTION phase, the RESERVE, RESERVE EXTENDED,
RELEASE AND RELEASE EXTENDED commands cannot be
executed.
SELECTION phase, the RESERVE, RESERVE EXTENDED,
RELEASE AND RELEASE EXTENDED commands cannot be
executed.
5
C4
nn
Drive failure
A serious error was detected in the drive's control system. ('nn'
is a Fujitsu unique code (00 to FF)
is a Fujitsu unique code (00 to FF)
4
* C: Sense Code, Q: Sub-sense Code