Philips SLA5520/00 Manual Do Utilizador

EN

1 Log on to the PC as Administrator.
2 Select Start.
3 Select Control Panel.
4 Open Network Connections.
5 Right-click on the connection that you use to connect to the Internet.
Example – Dial Up connection.

Example – Local Area Connection.
6 Select Properties. 
7 Select Advanced.
8 Enable Allow other network users to connect through this computer’s

Internet connection.

9 Disable Allow other network users to control or disable the shared

Internet connection.

10Select OK.
11Restart the PC.
12Restart the SLA5520.

1 Wait for the SLA5520 to find the media manager.
2 Place the installation CD (d) in the CD-Drive.
3 Select TOOLS.
4 Select Auto IP Network Utility.
5 Select the connection that you use to connect to the SLA5520.
Example – Wireless network connection.
6 Select Lock AutoIP.
7 Select Exit.

Locking the product identification number (IP address) of the PC is only allowed

when a Point to point (Ad-Hoc) network is used. 

Internet Connection Sharing is only available on a PC with 2 network

connections.
Example – PC with Internet connection (wired) and a wireless connection to the

SLA5520.

Searching for media managers can be reduced to less than 20 seconds.

Either - if your connection to the Internet is made available via a single PC – see

Enabling Internet connection sharing on your PC.

Or - if no base station, router, gateway or access points is available – see Lock

product identification number (IP address) on PC.