Vertex Standard FT-950 Manual Do Utilizador

 

FT-950 

Operating Manual 

Vertex Standard Co., Ltd. 

122

062 RTTY SHIFT 
Function: Selects the frequency shift for RTTY (AFSK) operation. 
Available Values:170/200/425/850 Hz 
Default Setting: 170 Hz 
 
063 RTTY TONE 
Function: Selects the Mark tone for RTTY operation. 
Available Values: 1275/2125 Hz 
Default Setting: 2125 Hz 
 
 
MODE-SSB Group 
064 A3J TX BPF 
Function: Selects the audio passband of the DSP modulator on the SSB mode. 
Available Values: 1-30/1-29/2-28/3-27/4-26 
1-30: 100 ~ 3000 (Hz) 
1-29: 100 ~ 2900 (Hz) 
2-28: 200 ~ 2800 (Hz) 
3-27: 300 ~ 2700 (Hz) 
4-26: 400 ~ 2600 (Hz) 
Default Setting: 3-27: 300 ~ 2700 (Hz) 
Note: the 

apparent

 power output, when using the widest bandwidths, may seem lower. 

This is normal, and it occurs because the available transmitter power is distributed 
over a wider bandwidth. The greatest compression of power output, conversely, occurs 
when using the “4-26” setting (400 ~ 2600 Hz), and this setting is highly recommended 
for contest or DX pile-up work. 
 
065 A3J LSB CAR 
Function: Adjusts the receiver carrier point for the LSB mode. 
Available Values: –200 Hz ~ +200 Hz (10 Hz steps) 
Default Setting: 0 Hz 
 
066 A3J USB CAR 
Function: Adjusts the receiver carrier point for the USB mode. 
Available Values: –200 Hz ~ +200 Hz (10 Hz steps) 
Default Setting: 0 Hz