VIZIO VMT37-60S Manual Do Utilizador

VIZIO VMT37-60S User Manual 

 6 

 

www.VIZIO.com 

 
Caution: This product is not designed for use in metal stud walls 

  Note: You must attach your TV wall mount to a wall that has at least 2” x 4” wood studs 

to avoid property damage or injury. 

 

1.  Using a stud finder, locate two wood studs that are 16” to 24” apart.  
2.  With a pencil, mark the location of the studs. 
 

1.  Tape the included Wall Mount Template to the 

wall so the holes align with the studs. Hold the 
wall plate [1] up to the Wall Mount Template and 
use the built-in level to make sure the Wall Mount 
Template is level. Put the wall plate [1] aside. 

2.  Drill 4 holes with the 3/16” drill bit, 2-1/2” deep. 

Remove the Wall Mount Template. 

1.  Using a 1/2” wrench or socket, attach the wall 

plate [1] to the wall with the supplied lag bolts and 
washers [3] & [4]. 

2.  Use the level before tightening bolts.  

  Note: It is important to make sure the wall plate is 

level. 

  Note: Do not over-tighten lag bolts. Tighten only 

until they are firmly against the wall plate.