VIZIO VMT37-60S Manual Do Utilizador

VIZIO VMT37-60S User Manual 

Version 10/16/2009 

7 

www.VIZIO.com 

 

1.  Tape the included Wall Mount Template to the wall. Hold the wall plate [1] up to the Wall 

Mount Template and use the built-in level to make sure it is level. Put the wall plate [1] 
aside. 

2.  Drill 6 holes with a 1/2” masonry bit, 2-1/2” deep where indicated. Remove the Wall 

Mount Template. 

 

1.  Install the provided anchors [5] in the holes, 

flush with the wall so that the hinged end 
faces out. 

1.  Using a 1/2” wrench or socket, attach the 

wall plate [1] to the wall with the supplied lag 
bolts and washers [3] & [4]. 

2.  Use the level before tightening bolts.  

  Note: It is important to make sure the wall 

plate is level. 

  Note: Do not over-tighten lag bolts. Tighten 

only until they are firmly against the wall plate.