Справочник Пользователя для American Standard Saver Bath Walls
2
7 5 4 74 8 - 10 0 Rev. C
Installation for use with tub Model# 2647.202
The studs should be located as shown to properly support walls. Provide additional studs where illustrated. (below)
The studs should be located as shown to properly support walls. Provide additional studs where illustrated. (below)
8-1/4"
(210mm)
8-1/4"
(210mm)
30"
(762mm)
6"
(152mm)
(152mm)
12"
(305mm)
60"
(1524mm)
9-1/4"
(235mm)
9-1/4"
(235mm)
10"
(254mm)
10"
(254mm)
NOTE: Installation over greenboard or firewalls: If installing wall panels over
greenboard and/or firewall material, and not directly on the studs, your alcove
dimensions must consider the thickness of this material. Measure from the
inside of the finished walls.
greenboard and/or firewall material, and not directly on the studs, your alcove
dimensions must consider the thickness of this material. Measure from the
inside of the finished walls.
IMPORTANT:
C) Rough plumbing and fittings must be installed before walls.
C) Rough plumbing and fittings must be installed before walls.
Installation for use with tub Model# 2647.102
The studs should be located as shown to properly support walls. Provide additional studs where illustrated. (below)
The studs should be located as shown to properly support walls. Provide additional studs where illustrated. (below)
8-1/4"
(210mm)
8-1/4"
(210mm)
30"
(762mm)
6"
(152mm)
12"
(305mm)
60"
(1524mm)
9-1/4"
(235mm)
9-1/4"
(235mm)
10"
(254mm)
10"
(254mm)