Справочник Пользователя для Sony UM-101
5
3. Camera Functions
3.1 12-Pin Connector
The 12-pin Hirose connector is located on the rear
plate of the camera. All ground signals on pin # 1, 3,
5, 8, 10, and 12 are common grounds. Although
+12 V DC input is recommended on pin #2, this
camera should withstand +12 V
plate of the camera. All ground signals on pin # 1, 3,
5, 8, 10, and 12 are common grounds. Although
+12 V DC input is recommended on pin #2, this
camera should withstand +12 V
±
1V input voltage.
Make sure to set the NRM/ASM switch to NRM
position on rear plate for external HD and VD
locking. Apply TTL signal on HD (pin # 6) and VD
(pin # 7) inputs if necessary, see section 4.1 for
details. Figure 3 below shows a top view of the 12-
pin Hirose connector.
position on rear plate for external HD and VD
locking. Apply TTL signal on HD (pin # 6) and VD
(pin # 7) inputs if necessary, see section 4.1 for
details. Figure 3 below shows a top view of the 12-
pin Hirose connector.
Pin No.
Description
Note
1
GND
2
+12V DC input
3
GND
4
Video
5
GND
6
External HD
TTL
7
External VD/Strobe
TTL
8
GND
9
N/C
10
GND
11
Integration control
TTL
12
GND
Figure 3. 12-Pin Hirose Connector
3.2 Shutter Speed Dial Switch
Shutter speed dial switch is located on the rear
panel (Figure 4). For normal shutter speeds, it has 9
different shutter speeds to select from. Position # 0
is standard scanning speed, 1/60 second. As
“Position #” goes higher, the shutter speed goes
higher and the video becomes darker.
panel (Figure 4). For normal shutter speeds, it has 9
different shutter speeds to select from. Position # 0
is standard scanning speed, 1/60 second. As
“Position #” goes higher, the shutter speed goes
higher and the video becomes darker.
Figure 4. Shutter Speed Dial Switch
Position
No.
No.
Shutter
Speed (sec.)
Speed (sec.)
Async
Capture (sec.)
Capture (sec.)
0
1/60 (Off)
1
1/120
N/A
2
1/250
N/A
3
1/500
N/A
4
1/1000
N/A
5
1/2000
N/A
6
1/4500
N/A
7
1/6000
N/A
8
1/10000
N/A
9
1/31000
N/A
3.3 Normal and Asynchronous Capture
Mode (NRM/ASM)
Mode (NRM/ASM)
NRM/ASM switch is located on camera rear plate.
Figure 5 shows all mode switch selections.
For normal operation, either with or without shutter
speed, NRM should be selected.
This camera DOES NOT provide asynchronous
capture feature.
Figure 5 shows all mode switch selections.
For normal operation, either with or without shutter
speed, NRM should be selected.
This camera DOES NOT provide asynchronous
capture feature.
Figure 5. Mode Switch