Справочник Пользователя для Sony PMW-350K

Attaching the Viewfinder

35

Cha

p

te

r 2  

P

rep
ar

at

ions

When the viewfinder is attached, do not leave the 
camcorder with the eyepiece facing the sun. Direct 
sunlight can enter through the eyepiece, be focused in the 
viewfinder and cause fire.

When attaching the viewfinder, make notes of the 
following points.
• Be sure to power off the camcorder before coupling the 

viewfinder connector to the camcorder’s VF connector 
(rectangular). If you make this connection when the 
camcorder power is on, the viewfinder may not 
function properly.

• Couple the viewfinder connector firmly to the 

camcorder’s VF connector (rectangular). If the 
coupling is loose, noise may appear on the video or the 
tally indicator may not operate properly.

1

positioning ring, 2 attach the 
viewfinder to the viewfinder fitting 
shoe, and 3 tighten the viewfinder left-
to-right positioning ring.

You can detach the viewfinder by following the 
attaching procedure in reverse order, but there is 
an additional action to take: when detaching the 
viewfinder from the fitting shoe, pull up the 
stopper.

To adjust the viewfinder left-to-right position, 
loosen the left-to-right positioning ring, and to 
adjust the front-to-back position, loosen the front-
to-back positioning knob.

Stopper

Viewfinder left-
to-right 
positioning ring

VF connector (rectangular)

Viewfinder front-to-back positioning knob

Viewfinder left-to-right positioning ring